Tobi is an expansion board that provides DVI display, 10/100baseT Ethernet, USB Host, USB OTG, USB console, and Stereo Audio to any Overo® COM. This is our most popular Overo COM expansion board. Engineers and makers are using it as a basis of their custom expansion board for the Overo COM.
Once you have tested the board, you may use Geppetto online to design and customize a board for your own project.
Provides DVI-D signals on an HDMI connector plus 10/100baseT Ethernet. Also features USB Host, USB OTG, USB client, Audio Stereo-out and line-in, and a 40-pin header with GPIO, PWM and A/D lines - an expansion board for any Overo COM.
|Tobi board||Expansion board: 10/100 Ethernet & USB Host|
2 x 70-pin AVX connectors
10/100 Base-T Ethernet
3.5V - 5V
|RTC Battery Holder||
Holder for 6mm rechargeable coin cell RTC battery
Built with components rated 0< T <70C
|USB Console Port||
|Microchip (SMSC) LAN9221 Ethernet Controller||A full-featured embedded LAN controller emphasizing performance, flexibility, ease of integration and system cost control while providing high performance and throughput.||Specs|
|Texas Instruments TPS62111 Step-Down Converter||A low-noise synchronous step-down DC-DC converter. **Component Max Vin:** 17V, 1.5A.||Specs|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|Texas Instruments TFP410 DVI Controller||A compact 64-pin TQFP, PanelBus package providing a reliable, low-current, low-noise, high-speed digital interface.||Specs|
|70-Pin AVX Connectors (Female – Overo Expansion)||Connect an Overo COM to an expansion board with these 70-pin AVX connectors.||Specs|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
|2015-02-25/overo/master/MLO||U-Boot 2014.10 first-stage bootloader|
|2015-02-25/overo/master/u-boot.img||U-Boot 2014.10 second-stage bootloader|
|2015-02-25/overo/master/README||Build information about the assets for the Overo platform|
|2015-02-25/overo/master/gumstix-xfce-image-overo.tar.bz2||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment|
|2015-02-25/overo/master/gumstix-console-image-overo.ubi||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform without a desktop environment (UBI File System)|
|2015-02-25/overo/master/gumstix-xfce-image-overo.ubi||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment (UBI File System)|
|Overo MLO||This is an Overo MLO for a Yocto Console Image|
|Overo Console Rootfs||This is an Overo rootfs for a Yocto Console Image|
|Overo Flashing MLO||[Flashing] This is an Overo MLO for a Yocto Console Image|
|Overo U-Boot||[Flashing] This is an Overo u-boot for a Yocto Console Image|
|Overo Kernel||[Flashing] This is an Overo kernel for a Yocto Console Image|
|Overo XFCE Rootfs||[Flashing] This is an Overo rootfs for a Yocto XFCE Image|