Gumstix Pi Newgate
Expose Every Compute Module Pin
Connect to any and all of the Raspberry Pi® Compute Module or Compute Module 3 pins on this breakout board.
Gumstix Pi Newgate
Every feature of the Raspberry Pi® Compute Module and Compute Module 3 is laid to bare with this breakout board. Easily monitor digital, analog, and differential signals via 0.1"-pitch pins. The headers on each side of the board provide 3 terminals for each pin of the 200-pin SODIMM connector, and a USB-microB connector provides a UART console connection.
A set of level shifters accommodate 3.3 and 1.8 volt logic levels for peripheral devices.
Learn more about this product by checking out the following:
Articles from Gumstix Blog
|RPi Compute Breakout Board||RPi Compute Breakout Board|
Micro B USB Plug
|Micro B USB Plug||Micro B USB Plug|
|SODIMM Connector||SODIMM connector to DDR2 200 pin module, such as the Raspberry Pi Compute Module|
|Connector (Power Jack Medium)||PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
|gumstix-xfce-image-raspberrypi-cm3.rpi-sdimg.xz||Yocto Morty disk image for RPCM3 with Xfce GUI|
|gumstix-console-image-raspberrypi-cm3.rpi-sdimg.xz||Yocto Morty disk image for RPCM3 with command line interface|
|Device tree overlay||DTBO to be copied to /boot/overlays|
|Installation instructions||Brief step-by-step instructions for flashing the CM3's on-board eMMC|
|dt/TBlzsxVI.dtb||Generated device tree for BRD900000000609|
|uEnv-geppetto.txt||This is a simple uEnv.txt to select a GDT-generated device tree i.e. fdtfile=geppetto.dtb|
|2017-10-29/raspberrypi-cm3/morty/gumstix-console-image-raspberrypi-cm3.rpi-sdimg.xz||gumstix-console-image-raspberrypi-cm3.rpi-sdimg.xz ddable file generated by buildbot on 2017-10-29 for raspberrypi-cm3 from morty|
|2017-10-29/raspberrypi-cm3/morty/gumstix-xfce-image-raspberrypi-cm3.rpi-sdimg.xz||gumstix-xfce-image-raspberrypi-cm3.rpi-sdimg.xz ddable file generated by buildbot on 2017-10-29 for raspberrypi-cm3 from morty|
|2017-10-29/raspberrypi-cm3/morty/gumstix-qt5-dev-image-raspberrypi-cm3.rpi-sdimg.xz||gumstix-qt5-dev-image-raspberrypi-cm3.rpi-sdimg.xz ddable file generated by buildbot on 2017-10-29 for raspberrypi-cm3 from morty|
|dt/ELYWYMgO.dtb||Generated device tree for BRD900000000609|