Gumstix Pi Conduit LoRa Gateway Kit (434 MHz)

In stock
KIT056EU4
$295.00

With the Gumstix Pi Conduit LoRa Gateway Kit (434 MHz), you can quickly deploy a LoRaWAN gateway for Raspberry Pi® Compute Module (not included).

Gumstix Pi Conduit LoRa Gateway is an LTE-ready LoRa® gateway solution with a NimbeLink® Skywire™ connector, Ethernet over USB, and a header for the RisingHF RHF0M301 gateway and concentrator module.

This version is reserved for Europe Region.

Gumstix Pi Conduit LoRa Gateway Kit (434 MHz) Ethernet

Gumstix Pi Conduit Gateway Kit

With the Raspberry Pi® Compute Module or CM3 and the RHF0M301 gateway module, the Gumstix Pi Conduit can deliver long-range communications over LoRaWAN™ between the Internet and LoRa® devices. Add a NimbeLink® Skywire™ LTE modem and deploy this gateway anywhere.

Kit includes:

Raspberry Pi® Compute Module and Skywire LTE modem not included.

Important: 434 MHz frequency band is reserved for Europe. If you are located in North America, you should look at Gumstix Pi Conduit LoRa Gateway Kit (915 MHz).

Customize Your Board

The Gumstix Pi Conduit LoRa Gateway design included in this kit is available in Geppetto for you to make it your own. Add sensors and GPS or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.

Related Posts

Learn more about this product by checking out the following:

Articles from Gumstix Blog

Included Components
USB Cable (micro-B to standard-A)

USB Cable (micro-B to standard-A)

RHF0M301-434 LoRa Gateway module

RHF0M301-434 430MHz ~ 437MHz LoRa Gateway module

Gumstix Pi Conduit LoRa Gateway

Gumstix Pi Conduit LoRa Gateway

5V, 3.5A Power Adapter

5V power adapter at 3.5A for use in North America.

Ethernet

10/100 Ethernet via USB 2.0

USB Device

Micro B USB Plug

USB Host

2-port USB 2.0 hub

Key Components
Micro B USB Plug

Micro B USB Plug

SODIMM Connector

SODIMM connector to DDR2 200 pin module, such as the Raspberry Pi Compute Module

Connector (Power Jack Medium)

PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug

LAN9512 Ethernet Controller and USB Hub

IC USB 2.0 ETHER CTRLR 64QFN

FTDI FT232RQ USB UART Interface

Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface

Specs
Mating Connectors
COVID-19 has affected our supply chain. Please expect delays on your orders while we do everything we can to fulfil them.