Overo Conduit LoRa Gateway
Overo Conduit LoRa Gateway is a LoRa® gateway solution with 10/100 Base-T Ethernet, and a header for the RisingHF RHF0M301 gateway and concentrator module. This board is for engineers and makers looking to test the possibility of LoRa technology with the Overo COM.
Once you have tested with the board, you may use Geppetto online to design and customize it for your own project.

Overo Conduit LoRa Gateway 
Overo Conduit LoRa Gateway
With the Gumstix Overo and the RHF0M301 gateway module, the Overo Conduit can deliver long-range communications over LoRaWAN™ between the Internet and LoRa® devices. Connect over WiFi with an Overo AirSTORM-Y COM (not included).
The LoRa Gateway and Concentrator module used in this board is ideal if you’re developing for smart city, wisdom agriculture, metering (water meter, electric meter, or gas meter), or all kinds of other long range IoT applications. You may learn more on the RHF0M301 product page.
Once you have tested with the board, you may use Geppetto online to design and customize it for your own project.
Customize Your Board
The Overo Conduit LoRa Gateway design is available in Geppetto for you to make it your own. Add WiFi or LTE connectivity or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.
Clone and kickstart your customized Gumstix Pi Conduit LoRa Gateway
Explore and create a customized expansion board from scratch
Related Posts
Learn more about this product by checking out the following:
Articles from Gumstix Gadgets
Articles from Gumstix Blog
Press Release
Included Components | ||
Overo LoRa Gateway | Overo LoRa Gateway |
---|
Board-To-Board Connector | 2 x 70-pin AVX connectors |
---|---|
Ethernet | 10/100 Base-T |
Product Family | Overo |
USB Device | Micro B USB Plug |
Key Components | ||
Micro B USB Plug | Micro B USB Plug | |
---|---|---|
Connector (Power Jack Medium) | PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug | |
Microchip (SMSC) LAN9221 Ethernet Controller | A full-featured embedded LAN controller emphasizing performance, flexibility, ease of integration and system cost control while providing high performance and throughput. | Specs |
FTDI FT232RQ USB UART Interface | Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface | Specs |
Mating Connectors | ||
70-Pin AVX Connectors (Female – Overo Expansion) | Connect an Overo COM to an expansion board with these 70-pin AVX connectors. | Specs |
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
Software Links | ||
2015-02-25/overo/master/MLO | U-Boot 2014.10 first-stage bootloader | |
2015-02-25/overo/master/u-boot.img | U-Boot 2014.10 second-stage bootloader | |
2015-02-25/overo/master/README | Build information about the assets for the Overo platform | |
2015-02-25/overo/master/gumstix-xfce-image-overo.tar.bz2 | Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment | |
2015-02-25/overo/master/gumstix-console-image-overo.ubi | Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform without a desktop environment (UBI File System) | |
2015-02-25/overo/master/gumstix-xfce-image-overo.ubi | Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment (UBI File System) | |
uEnv-geppetto.txt | This is a simple uEnv.txt to select a GDT-generated device tree i.e. fdtfile=geppetto.dtb | |
dt/azzbzjfV.dtb | Generated device tree for BRD900000000570 |