WiFi RGB LED Matrix

Backordered
PKG900000000794
$195.00

Drive 256 RGB LEDs with Arduino and USB Type-C PD

Take advantage of up to 100 Watts of power with USB Type-C Power Delivery, the WiFi-connected Microchip ATSAMW25 and a 16x16 RGB Matrix.

WiFi RGB LED Matrix WiFi

WiFi RGB LED Matrix

The WiFi RGB LED Matrix board employs USB Type-C Power Delivery technology to deliver enough power to drive over 1000 RGB LEDs, as well as provide a USB connection to the MCU, from a single port. Right-angle mounting brackets, and data and power connections on the back-side of the board make adding RGB Matrix Tiles simple and seamless to create larger RGB displays.

USB Type-C PD

The WiFi RGB LED Matrix demonstrates Geppetto's new Type-C Power Delivery module. Add it to your Geppetto design for up to 100W of power!

RGB LEDs

The RGBs used in this design are the Worldsemi WS2812B-3535s (datasheet), communicate at 800 Kbps and are compatible with Adafruit's NeoPixel libraries.

ATSAMW25

The ATSAMW25 WiFi MCU module is the same device used on the Arduino MKR1000 and is easily programmed using the Arduino IDE.

Included Components
RGB LED Matrix

RGB LED Matrix

Flash Memory (NAND)

256 KB

Processor

ARM Cortex-M0+

RAM

32 KB SRAM

USB Device

USB Type-C Connector

WiFi

802.11b/g/n

Key Components
USB Type-C Port

USB Type-C Port

Microchip ATSAMW25 SmartConnect

SmartConnect ATWINC1500B-MU-T Module - SmartConnect ATWINC1500B-MU-T Module/ MODULE (R6)

15K 0201

RES 15K OHM 1/20W 5% 0201 SMD

Mating Connectors

Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.

Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.

Our Support page links additional resources.

Software Version: