Gumstix - Dream Design Deliver

Cart ContentsCheckoutMy Account

$159.00

Overo® AirSTORM COM

[GUM3703A]
Image: Overo® AirSTORM COM
Thumbnail: Overo® AirSTORM COM Thumbnail: Overo® AirSTORM COM
Click an image to enlarge it.

Our mid-level Overo STORM computer-on-module featuring wireless communications. The Overo AirSTORM offers 802.11g and Bluetooth connectivity. Based on the 800 MHz Texas Instruments AM3703 Sitara applications processor, we recommend Overo STORM series computers-on-module for most users.

2 x 70-pin AVX connectors

Included

802.11 b/g Included
Architecture

ARM Cortex-A8

Bluetooth Included
Camera Connector

27-pin connector for camera signals

COM Mounting Holes

Four (4) x #0 mounting holes for securing to Overo-series, or custom, expansion board

Height 4.2 mm
Layout

For OEM design, refer to the layout version shown here.

Length

58 mm

NAND 512 MB
Overo

In the Overo series

Performance

Up to 2,000 Dhrystone MIPS

Power

Powered via expansion board (Overo series or custom) connected to dual 70-pin connectors

Power Management

Texas Instruments TPS65950

Processor

Texas Instruments OMAP3703

Processor Speed

1 GHz (Recommended @ 800MHz)

Temperature

Built with components rated 0C < T <85C

Weight

GS3703A @ 5.6g

GUM3703A @ 42.6g (incl. shipping case w/ antennas)

Width

17 mm

Key components
Micron 512MB DDR LPDRAM & 512MB NAND Flash Memory

Package-on-package (PoP) memory solution that minimizes power consumption, maximizes board space and increases speed.

microSD Card Slot

An onboard card-slot for system storage expansion using microSD cards.

Texas Instruments AM3703 Applications Processor

1GHz ARM Cortex-A8 Sitara AM3703 high-performance microprocessor designed to provide best in class ARM and graphics performance while delivering low power consumption. According to Texas Instruments, AM3703 is fully backward compatible with previous OMAP™ processors.

spec sheet
Texas Instruments TPS65950 Power Management

The TPS65950 device is a highly integrated power-management integrated circuit (IC) that supports the power and peripheral requirements of the OMAP3-driven Overo series COMs.

spec sheet
2 x U.FL Antenna with Collar

U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.

Wi2Wi W2CBW003C WiFi/BT Transciever

This elegant combination from Wi2Wi, based on Marvell's industry leading 88W8686, enables both 802.11b/g and Bluetooth 2.0+EDR.

spec sheet
Mating connectors
2 x 70-Pin AVX Connector (Male – Overo COMs)

Connect your Gumstix Overo COM to an expansion board with these 70-pin AVX connectors.

spec sheet
Hirose 27-Pin Camera Connector (Overo COMs)

Connect a Caspa camera to an Overo COM with this connector (Hirose FH26-27S-0.3SHW)

spec sheet
2 x U.FL Connector

Attach a U.FL Wi-Fi or Bluetooth antenna to a Gumstix system with this connector.

Links to manufacturer's specification sheets are provided for reference.
Comparable parts might be substituted in manufacturing.
Further hardware information (I/O pinouts, Benchmarks, schematics and more)

Gumstix innovative products are designed to work together to deliver a great computing experience while accelerating development and time to market.

Geppetto Boards
Alto43R

A variant of Alto35 with the new 4.3" Resistive Touch Screen

Remote Data Collection Kits
Overo® Breakout pack
Digital signal processor (DSP)

Overo WaterSTORM COM, Pinto-TH expansion board, cables (USB), 2GB microSD card with 5V US power supply

Geppetto Boards
Alto35

This expansion board, built by Geppetto, uses our new line of 3.5" displays from In Touch, and includes accelerometer, audio jacks, RC Servo connections, LED's and pushbuttons.

spec sheet
Network Enabled USB device server for Remote Sensors

BRD for Idea for Net to USB adapter board

spec sheet
Overo Expansion
Thumbo

USB-powered, DIP-style breakout board for any Overo COM without wireless communications also featuring a sixty (60) header at 1.8V logic.

Tobi-Duo
Dual 10/100 Ethernet

Provides dual 10/100baseT Ethernet connectivity - an expansion board for any Overo COM.

Stagecoach
Integrated 9-Port 10/100 Switch

Harness the power of up to seven Overo COMs networked on a single board

Pinto-TH

DIP-style breakout board for any Overo COM featuring USB OTG, 3.3V supply and level shifters for use with a set of test pads.

Caspa™ FS
Camera

Caspa FS camera board has a CMOS imager (Aptina MT9V032, 752 x 480, 60 FPS, color) making it ideal for robotics computer vision. Without an optical filter, the Caspa FS receives the full-spectrum including infra-red range.

Tobi
DVI-D (HDMI)

Provides DVI display, 10/100baseT Ethernet, USB Host, USB OTG, USB console and Stereo Audio to any Overo® COM

Chestnut43
LCD Display Connectivity

Add LCD Touchscreen, Ethernet, USB host and Stereo Audio to any Overo® COM

Summit
DVI-D (HDMI)

An expansion board to provide DVI display, USB Host, USB OTG, USB console and Stereo Audio to any Overo® COM

TurtleCore

Use Linux in an iRobot Create® by snapping the TurtleCore™ expansion board into its cargo bay carrying an Overo or Overo STORM COM.

Caspa™ VL
Camera

Caspa VL camera board has a CMOS imager (Aptina MT9V032, 752 x 480, 60 FPS, color) making it ideal for robotics computer vision. Using an optical filter to cut out the IR range, the Caspa VL receives only visible spectrum light.

Alcatraz™

A breakout board that provides access to all 140 signals available from the dual 70-pin connectors of any attached Overo COM.

Janus

An Interposer board with USB-Serial console access, the Janus™ expansion board sits inline between an Overo COM and Stagecoach, Pinto, Thumbo or Tobi-Duo expansion board to provide the USB console port for accessing the Overo COM.

RoboVero™

NXP LPC1769 microcontroller at 120MHz for robotics applications. Manage the CortexM3 from an onboard Overo COM, or from an external host on the HubCommander interface. Onboard sensors, buttons, LEDs, USB Hub, header pins for GPIO/CAN/I2C/SPI/UART/PWM and A/D.

Alto35 Display Set

Ideal for handheld-sized, touchscreen-driven projects.

Connectors
70-pin AVX Connectors (10 pk)

70-pin connectors for custom board of Overo series

Hardware
Retaining spacers 48 / 62(blue) for DuoVero and Overo (50pk)

Pack of 50 x 46 / 62 mils CONH0021 retaining spacers (1.5mm separation, 1.65mm holes). Suitable for configuration of Gumstix DuoVero COM or Overo COM with an expansion board of thickness 62 mils or less.

Memory Cards
Angstrom System Card (Overo)

Bootable microSD for Overo COM

Hardware
Retaining spacers 48 / 48 (white) for DuoVero and Overo (50pk)

Pack of 50 x 48 / 48 mils CONH0020 retaining spacers (1.5mm inter-board spacing, 1.65mm hole diameter). Suitable for configuration of Gumstix DuoVero COM or Overo COM and expansion board of thickness 48 mils or less, which includes Gumstix expansion boards.

Custom Solutions
Build it with Geppetto »
Build your own: Schematics »
Gumstix' Verified Design Consultants (VDC) »
  • Yocto Project
  • Yocto Project
  • Yocto Project

The Overo series supports Yocto Project, Ubuntu by Linaro and Angstrom software images. The Yocto Project is the principle build system for Gumstix products, while Ubuntu images are prepackaged with ROS, the Robot Operating System.

Bootable microSD cards with this image installed can be purchased as an accessory or downloaded free of charge and installed on any microSD card.

Software Bootable microSD Download Image
Yocto Project Product not available. Download
Ubuntu Purchase microSD Download
Angstrom Purchase microSD Download

Images can be written to flash memory on supported products. In the absence of a microSD card, these products will boot from flash memory by default.

Each Overo® AirSTORM COM comes with:

Image of Overo® AirSTORM COM
  • Overo AirSTORM COM (board)

    Overo Air 3703

  • 4 x Spacers (1.5mm 0-80 retaining 48/48)

    spacers: symmetric 48mil PCB with 1.5mm between

  • 2 x U.FL Antenna with Collar

    U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.

0 items
icon legend     show