Gumstix - Dream Design Deliver

Cart ContentsCheckoutMy Account

$75.00

Caspa™ FS

[PKG30009]
Image: Caspa™ FS
Thumbnail: Caspa™ FS Thumbnail: Caspa™ FS
Click an image to enlarge it.

Get your industrial robot, autonomous vehicle or surveillance device to market quickly and economically with open-source, machine vision capabilities. The Caspa FS omits an optical filter, receiving the full-spectrum of light, including the infra-red range.

Camera Included
COM Mounting Holes

Four (4) #3 mounting holes

Length 39 mm
Overo

Within the Overo series of products

Power

3.3V-4.2V, provided by the attached Overo COM (not included)

Temperature

Built with components rated -25C < T < 70C

Weight

BRD30009 @ 22.9g

Width 25.7 mm
Key components
Aptina MT9V032C12STC Image Sensor

This ⅓” wide VGA CMOS digital image sensor provides exceptional image quality with superior color accuracy, low-light sensitivity, and low noise level.

spec sheet
Camera Flex Ribbon Cable (80mm, White)

This flex ribbon cable connects a Gumstix Caspa cameras to an Overo COM.

Mating connectors
Molex Easy-On FPC Connector (Caspa Cameras)

A 27-pin FPC connector on Caspa cameras to connect to Overo COMs. (Molex 502250-2791)

spec sheet
Links to manufacturer's specification sheets are provided for reference.
Comparable parts might be substituted in manufacturing.
Further hardware information (I/O pinouts, Benchmarks, schematics and more)

Gumstix innovative products are designed to work together to deliver a great computing experience while accelerating development and time to market.

Robotics Kits
Robotics Development Kit
802.11 b/g Bluetooth

Solutions kit for robotics featuring the RoboVero

Mobile Robotics Development Kit
802.11 b/g Bluetooth

Solutions kit for robotics featuring the TurtleCore

Handhelds Kits
Handheld Development Kit (3.5")
802.11 b/g Bluetooth

Solutions kit for handhelds featuring the Alto35

Remote Data Collection Kits
Remote Data Collection Development Kit
Digital signal processor (DSP) DVI-D (HDMI)

Development kit for Remote Data Collection featuring the Tobi and a TidalSTORM COM

Overo® Breakout pack
Digital signal processor (DSP)

Overo WaterSTORM COM, Pinto-TH expansion board, cables (USB), 2GB microSD card with 5V US power supply

Network Appliances Kits
Barebones Wireless Appliance Development Kit
802.11 b/g Bluetooth

Get unfettered access to the Overo AirSTORM computer-on-module with the Barebone Network Appliance Development Kit. Featuring an Alcatraz breakout board offering access to 140 signals and onboard 802.11b/g, this barebones kit gives network appliance developers the tools they need to get started creating sophisticated and flexible appliances.

Computers
Waysmall Silverlode
DVI-D (HDMI)

Ubuntu on an 800MHz 512MB RAM and 512MB Flash with 8GB flash drive, High speed USB Host, DVI-D video, and 100Mbps Ethernet.

Overo COMS
Overo® TidalSTORM
Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 1GB RAM & 0MB Flash.

Overo® SandSTORM COM

AM3703-based Gumstix Overo computer-on-module with 256MB RAM & 0MB Flash.

Overo® IronSTORM COM
802.11 b/g Bluetooth Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) built with extended temperature components, includes Bluetooth and 802.11b/g wireless communications.

Overo® Tide COM
Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 512MB RAM & 0MB Flash.

Overo® FE COM
802.11 b/g Bluetooth Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP) built with extended temperature components, includes Bluetooth and 802.11b/g wireless communications.

Overo® Air COM
802.11 b/g Bluetooth

OMAP3503-based Gumstix Overo computer-on-module with Bluetooth and 802.11b/g wireless communications

Overo® Water COM
Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP)

Overo® Earth COM

OMAP3503-based Gumstix Overo computer-on-module

Overo® Sand COM

OMAP3503-based Gumstix Overo computer-on-module with 256MB RAM & 0MB Flash.

Overo® FireSTORM COM
802.11 b/g Bluetooth Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 802.11 b/g and Bluetooth wireless communications

Overo® AirSTORM COM
802.11 b/g Bluetooth

AM3703-based Gumstix Overo computer-on-module with 802.11 b/g and Bluetooth wireless communications

Overo® WaterSTORM COM
Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP)

Overo® EarthSTORM COM

AM3703-based Gumstix Overo computer-on-module

Overo® Fire COM
802.11 b/g Bluetooth Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with Bluetooth and 802.11b/g wireless communications

Overo Expansion
Caspa™ VL
Camera

Caspa VL camera board has a CMOS imager (Aptina MT9V032, 752 x 480, 60 FPS, color) making it ideal for robotics computer vision. Using an optical filter to cut out the IR range, the Caspa VL receives only visible spectrum light.

Connectors
27-pin Hirose FH26-27S connector (3 pk)

Hirose FH26-27S connectors (CON046)

Custom Solutions
Build it with Geppetto »
Build your own: Schematics »
Gumstix' Verified Design Consultants (VDC) »
Everything you need to get started right out of the package:
No packs available
  • Yocto Project
  • Yocto Project
  • Yocto Project

The Overo series supports Yocto Project, Ubuntu by Linaro and Angstrom software images. The Yocto Project is the principle build system for Gumstix products, while Ubuntu images are prepackaged with ROS, the Robot Operating System.

Bootable microSD cards with this image installed can be purchased as an accessory or downloaded free of charge and installed on any microSD card.

Software Bootable microSD Download Image
Yocto Project Product not available. Download
Ubuntu Purchase microSD Download
Angstrom Purchase microSD Download

Images can be written to flash memory on supported products. In the absence of a microSD card, these products will boot from flash memory by default.

Each Caspa™ FS comes with:

Image of Caspa™ FS
  • Camera Flex Ribbon Cable (80mm, White)

    This flex ribbon cable connects a Gumstix Caspa cameras to an Overo COM.

  • CaspaPX camera board

    Camera board for Overo COM based on Pixhawk camera board

0 items
icon legend     show