Gumstix - Dream Design Deliver

Cart ContentsCheckoutMy Account

$422.00

Overo® EVM pack

[KIT0033]
Image: Overo® EVM pack
Click an image to enlarge it.

This Pack: A complete Gumstix Overo development kit providing the combination of ARM Cortex-A8, DSP processing, 3D graphics acceleration, Bluetooth, 802.11(b/g) wireless communications, 10/100baseT Ethernet, high speed USB Host & OTG, 8GB of storage and a 4.3" touch screen LCD display.

Typical Applications Include: Ideal EVM kit for first-time OMAP users and for the development of any OMAP-based prototype or product.

Note: Product substitutions cannot be made to a Gumstix pack. Feel free to assemble your own gum pack by selecting desired products individually through our store.

2 x 70-pin AVX connectors

Included

40-pin header

Not populated

802.11 b/g Included
Architecture

ARM Cortex-A8

Battery connector

Battery holder for 6mm rechargeable coin

Bluetooth Included
Camera Connector

27-pin connector for camera signals

Case Mounting Holes

Four (4) x #4 mounting holes to secure a Chestnut43 inside a casing

COM Mounting Holes

Four (4) x #0 mounting holes for extra secure mounting of any Overo COM

Digital signal processor (DSP)

C64x Fixed Point DSP 660,800 Mhz (Max.)

Graphics

OpenGL POWER SGX Graphics Accelerator

Height

4.2 mm

Layout

For OEM design, refer to the layout version shown here.

LCD Display Connectivity

4.3" resistive touch LCD

Length

118.3 mm

NAND 512 MB
Overo

Within the Overo series of products

Power

3.5V - 5V

Power Management

Texas Instruments TPS65950

Processor

Texas Instruments OMAP3730 application processor

Processor Speed

Up to 1 GHz (recommended @ 800MHz)

screen size 4.3 inch
Stereo Audio

Stereo Audio In /Out jacks

Temperature

Built with components rated 0< T <70C

USB Device

Included

USB Host

Included

USB OTG

Included

Weight

BRD30005 @ 41.6g

PKG30005 @ 77g (incl. shipping case)

Width

67.25 mm

Each Overo® EVM pack comes with:

Image of Overo® EVM pack
  • 5V US Power Adapter

    5V power adapter for use in North America.

  • Chestnut43

    LCD-ready for an LG or Samsung 4.3" touch-screen @ 16bpp plus 10/100baseT Ethernet. Also features USB Host, USB OTG, Audio Stereo-out and line-in, and a 40-pin header with GPIO, PWM and A/D lines - an expansion board for any Overo COM.

  • ethernet cable 6 ft

    ethernet cable 6 ft CAT-5

  • Lexar 8GB Class10

    Lexar 8GB Class 10 microSD Card for Overo, Overo STORM and DuoVero classes of COMs

  • Overo FireSTORM COM

    DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 802.11 b/g and Bluetooth wireless communications

  • Samsung 4.3 inch LCD touch screen

    Samsung 4.3 inch TFT LCD (480 x 272) with 4-wire resistive touch screen

  • USB Mini-B to Standard-A Cable

    A USB cable for connecting your USB Console Port-enabled Gumstix system to a development machine or for USB On-the-Go in device mode.

  • USB On-the-Go Cable (Mini-B to Mini-A)

    For USB Host or USB OTG in Host mode: connect your Gumstix Overo configuration to a downstream hub via this USB cable

Key components
FTDI FT232RQ USB UART Interface

Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface.

spec sheet
Microchip (SMSC) LAN9221 Ethernet Controller

A full-featured embedded LAN controller emphasizing performance, flexibility, ease of integration and system cost control while providing high performance and throughput.

spec sheet
Micron 512MB DDR LPDRAM & 512MB NAND Flash Memory

Package-on-package (PoP) memory solution that minimizes power consumption, maximizes board space and increases speed.

microSD Card Slot

An onboard card-slot for system storage expansion using microSD cards.

Texas Instruments DM3730 Applications Processor

1GHz ARM Cortex-A8 DaVinci DM3730 high-performance, extended temperature microprocessor. Includes a 720p HD DSP imaging and video accelerator and PowerVR SGX graphics accelerator with Open GL ES 2.0 and OpenVG support. The DM3730 has been designed to provide best in class ARM and graphics performance while delivering low power consumption.

spec sheet
Texas Instruments TPS62111 Step-Down Converter

A low-noise synchronous step-down DC-DC converter. Component Max Vin: 17V, 1.5A.

spec sheet
Texas Instruments TPS65950 Power Management

The TPS65950 device is a highly integrated power-management integrated circuit (IC) that supports the power and peripheral requirements of the OMAP3-driven Overo series COMs.

spec sheet
2 x U.FL Antenna with Collar

U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.

Wi2Wi W2CBW003C WiFi/BT Transciever

This elegant combination from Wi2Wi, based on Marvell's industry leading 88W8686, enables both 802.11b/g and Bluetooth 2.0+EDR.

spec sheet
Mating connectors
2 x 70-Pin AVX Connector (Male – Overo COMs)

Connect your Gumstix Overo COM to an expansion board with these 70-pin AVX connectors.

spec sheet
2 x 70-Pin AVX Connectors (Female – Overo Expansion)

Connect an Overo COM to an expansion board with these 70-pin AVX connectors.

spec sheet
Hirose 27-Pin Camera Connector (Overo COMs)

Connect a Caspa camera to an Overo COM with this connector (Hirose FH26-27S-0.3SHW)

spec sheet
2 x U.FL Connector

Attach a U.FL Wi-Fi or Bluetooth antenna to a Gumstix system with this connector.

Other connectors
2 x 3.5mm Stereo Audio Jacks

A low-profile, surface mount 3.5mm audio jack from CUI (CUI SJ-3523-SMT).

spec sheet
Halo Electronics Low-Profile RJ-45 Connector

A low-profile Ethernet jack with LEDs and magnetics. Halo Electronics HFJP1-S003-S1L12.

spec sheet
Hirose 45 Pin FPC Connector with Bottom Contacts

Connect Samsung display FPCs that do not curl around the expansion board (e.g., Palo43) to this connector.

spec sheet
Power Jack

The CUI PJ1-022 power jack is the standard jack for all Gumstix 4.0 V and 5.0 V wall adapters.

spec sheet
USB Mini-AB Jack

This Mini-AB USB connector allows either a USB Mini-A or Mini-B male plug. For USB On-the-Go, this allows the system to operate in either host or device mode.

spec sheet
USB Mini-B to Standard-A Cable

A USB cable for connecting your USB Console Port-enabled Gumstix system to a development machine or for USB On-the-Go in device mode.

USB On-the-Go Cable (Mini-B to Mini-A)

For USB Host or USB OTG in Host mode: connect your Gumstix Overo configuration to a downstream hub via this USB cable

Links to manufacturer's specification sheets are provided for reference.
Comparable parts might be substituted in manufacturing.
Further hardware information (I/O pinouts, Benchmarks, schematics and more)

Supported Software:

  • Ubuntu
  • Yocto Project

The Overo® EVM pack ships with a Ubuntu (Linaro) system card.

This image is recommended for beginners looking to get up and running as quickly as possible. Users who need the absolute latest supported version of Linux or more advanced developers may wish to consider switching to the Yocto Project image.

More information on supported software platforms for Gumstix products »

0 items
icon legend     show