This Pack: A Gumstix pack providing the combination of its OMAP3530 processing, 10/100baseT Ethernet, high speed USB Host & OTG, 8GB of storage and HDMI over DVI for connecting a monitor.
Applications Include: Any network-connected information or data communication appliance needing the graphics and performance of OMAP.
Note: Product substitutions cannot be made to a Gumstix pack. Feel free to
assemble your own gum pack by selecting desired products individually through
2 x 70-pin AVX connectors
27-pin connector for camera signals
Case Mounting Holes
Four (4) x #2 mounting holes to secure this Tobi board inside a casing
COM Mounting Holes
Four (4) x #0 mounting holes for extra secure mounting of any Overo COM
Digital signal processor (DSP)
C64x+ digital signal processor (DSP) core
OpenGL POWER SGX™ for 2D and 3D graphics acceleration
For OEM design, use layout version R2606 or later, shown
Within the Overo series of products
Up to 1,400 Dhrystone MIPS
3.5V - 5V
Texas Instruments TPS65950
Texas Instruments OMAP3530 Applications Processor
RTC Battery Holder
Holder for 6mm rechargeable coin cell RTC battery
Stereo Audio In /Out jacks
Built with components rated 0< T <70C
USB Console Port
BRD30002 @ 29.0g
PKG30002 @ 67.3g (incl. shipping case)
Each Overo® Network pack comes with:
5V US Power Adapter
5V power adapter for use in North America.
Cable (HDMI to DVI-D)
Connect your Gumstix configuration to a display monitor using this cable for video out. For expansion boards with DVI-D (HDMI) port.
ethernet cable 6 ft
ethernet cable 6 ft CAT-5
Lexar 8GB Class10
Lexar 8GB Class 10 microSD Card for Overo, Overo STORM and DuoVero classes of COMs
Overo Water COM
OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP)
Provides DVI-D signals on an HDMI connector plus 10/100baseT Ethernet. Also features USB Host, USB OTG, USB client, Audio Stereo-out and line-in, and a 40-pin header with GPIO, PWM and A/D lines - an expansion board for any Overo COM.
USB Mini-B to Standard-A Cable
A USB cable for connecting your USB Console Port-enabled Gumstix system to a development machine or for USB On-the-Go in device mode.
USB On-the-Go Cable (Mini-B to Mini-A)
For USB Host or USB OTG in Host mode: connect your Gumstix Overo configuration to a downstream hub via this USB cable
FTDI FT232RQ USB UART Interface
Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface.
This image is recommended for beginners looking to get up and running as quickly as possible. Users who need the absolute latest supported version of Linux or more advanced developers may wish to consider switching to the Yocto Project image.