Gumstix - Dream Design Deliver

Cart ContentsCheckoutMy Account

$27.50

Pinto-TH

[PKG30011]
Image: Pinto-TH
Thumbnail: Pinto-TH Thumbnail: Pinto-TH
Click an image to enlarge it.

DIP style breakout board for any Overo COM featuring USB OTG, 3.3V supply and level shifters for use with a set of test pads.

Please note: The maximum input voltage on a standard Pinto-TH is 5.5V due to capacitor ratings. This can be changed by modifying the capacitors. View the schmatics for more information.

2 x 70-pin AVX connectors

Included

60-pin header

Not Populated

COM Mounting Holes

Four (4) x #0 mounting holes for extra secure mounting of an Overo COM

Length

76.2 mm

Overo

Within the Overo series of products

Power

Input: 5.5V recommended (Max: 10V)

Temperature

Built with components rated -20< T <70C

USB OTG

Included

Weight

BRD30011 @ 6.6g

PKG30011 @ 17g (incl. shipping case)

Width

23 mm

Key components
Texas Instruments TPS62111 Step-Down Converter

A low-noise synchronous step-down DC-DC converter. Component Max Vin: 17V, 1.5A.

spec sheet
Mating connectors
2 x 70-Pin AVX Connectors (Female – Overo Expansion)

Connect an Overo COM to an expansion board with these 70-pin AVX connectors.

spec sheet
Other connectors
USB Mini-AB Jack

This Mini-AB USB connector allows either a USB Mini-A or Mini-B male plug. For USB On-the-Go, this allows the system to operate in either host or device mode.

spec sheet
Links to manufacturer's specification sheets are provided for reference.
Comparable parts might be substituted in manufacturing.
Further hardware information (I/O pinouts, Benchmarks, schematics and more)

Gumstix innovative products are designed to work together to deliver a great computing experience while accelerating development and time to market.

Handhelds Kits
Handheld Development Kit (3.5")
802.11 b/g Bluetooth

Solutions kit for handhelds featuring the Alto35

Robotics Kits
Robotics Development Kit
802.11 b/g Bluetooth

Solutions kit for robotics featuring the RoboVero

Handhelds Kits
Handheld Development Kit (4.3")
10/100/1000 Base-T Ethernet 802.11 b/g/n Bluetooth LCD Display Connectivity

Featuring a 4.3” LCD touch screen, audio in/out, push-buttons and more, the Gumstix 4.3” Handheld Development Kit has all the hardware you need to get started with your own handheld application. At the heart of the system is a WiFi/Bluetooth-enabled Pepper SBC running Android, providing handheld developers with the world's most popular mobile operating system.

Overo COMS
Overo® FireSTORM COM
802.11 b/g Bluetooth Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 802.11 b/g and Bluetooth wireless communications

Overo® IronSTORM COM
802.11 b/g Bluetooth Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) built with extended temperature components, includes Bluetooth and 802.11b/g wireless communications.

Overo® TidalSTORM
Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 1GB RAM & 0MB Flash.

Overo® Earth COM

OMAP3503-based Gumstix Overo computer-on-module

Overo® SandSTORM COM

AM3703-based Gumstix Overo computer-on-module with 256MB RAM & 0MB Flash.

Overo® AirSTORM COM
802.11 b/g Bluetooth

AM3703-based Gumstix Overo computer-on-module with 802.11 b/g and Bluetooth wireless communications

Overo® Water COM
Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP)

Overo® Fire COM
802.11 b/g Bluetooth Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with Bluetooth and 802.11b/g wireless communications

Overo® Air COM
802.11 b/g Bluetooth

OMAP3503-based Gumstix Overo computer-on-module with Bluetooth and 802.11b/g wireless communications

Overo® FE COM
802.11 b/g Bluetooth Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP) built with extended temperature components, includes Bluetooth and 802.11b/g wireless communications.

Overo® Tide COM
Digital signal processor (DSP)

OMAP3530-based Gumstix Overo computer-on-module (includes OpenGL and DSP) with 512MB RAM & 0MB Flash.

Overo® EarthSTORM COM

AM3703-based Gumstix Overo computer-on-module

Overo® WaterSTORM COM
Digital signal processor (DSP)

DM3730-based Gumstix Overo computer-on-module (includes OpenGL and DSP)

Overo® Sand COM

OMAP3503-based Gumstix Overo computer-on-module with 256MB RAM & 0MB Flash.

Overo Expansion
Janus

An Interposer board with USB-Serial console access, the Janus™ expansion board sits inline between an Overo COM and Stagecoach, Pinto, Thumbo or Tobi-Duo expansion board to provide the USB console port for accessing the Overo COM.

Custom Solutions
Build it with Geppetto »
Build your own: Schematics »
Gumstix' Verified Design Consultants (VDC) »
  • Yocto Project
  • Yocto Project
  • Yocto Project

The Overo series supports Yocto Project, Ubuntu by Linaro and Angstrom software images. The Yocto Project is the principle build system for Gumstix products, while Ubuntu images are prepackaged with ROS, the Robot Operating System.

Bootable microSD cards with this image installed can be purchased as an accessory or downloaded free of charge and installed on any microSD card.

Software Bootable microSD Download Image
Yocto Project Product not available. Download
Ubuntu Purchase microSD Download
Angstrom Purchase microSD Download

Images can be written to flash memory on supported products. In the absence of a microSD card, these products will boot from flash memory by default.

Each Pinto-TH comes with:

Image of Pinto-TH
  • Pinto board

    Pinto board

0 items
icon legend     show