Gumstix - Dream Design Deliver

Cart ContentsCheckoutMy Account

$259.00

Overo® Summit Pack

[KIT0025]
Image: Overo® Summit Pack
Click an image to enlarge it.

This Pack: The original pack in the Overo series.

Applications Include: OMAP3503 development, robotics lab.

Note: Product substitutions cannot be made to a Gumstix pack. Feel free to assemble your own gum pack by selecting desired products individually through our store.

2 x 70-pin AVX connectors

Included

40-pin header

Not Populated

Architecture

ARM Cortex-A8

Battery connector

Battery holder for 6mm rechargeable coin

Camera Connector

27-pin connector for camera signals

Case Mounting Holes

Four (4) x #2 mounting holes to secure this Summit board inside a casing.

COM Mounting Holes

Four (4) x #0 mounting holes for secure mounting of any Overo COM

DVI-D (HDMI)

HDMI

Height

4.2 mm

Layout

For OEM design, use layout version R2606 or later, shown here.

Length

80 mm

NAND 512 MB
Overo

Within the Overo series of products

Performance

Up to 1,200 Dhrystone MIPS

Power

3.5V - 5V

Power Management

Texas Instruments TPS65950

Processor

Texas Instruments OMAP3503 Applications Processor

Processor Speed

600 MHz

Stereo Audio

Stereo Audio In /Out jacks

Temperature

Built with components rated 0< T <70C

USB Device

Included

USB OTG

Included

Weight

BRD30001 @ 16.5g

PKG30001 @ 40g (incl. shipping case)

Width

39 mm

Each Overo® Summit Pack comes with:

Image of Overo® Summit Pack
  • 5V US Power Adapter

    5V power adapter for use in North America.

  • Cable (HDMI to DVI-D)

    Connect your Gumstix configuration to a display monitor using this cable for video out. For expansion boards with DVI-D (HDMI) port.

  • microSD card 2GB

    2GB microSD card for Overo COM or Verdex Pro COM

  • Overo Earth COM

    OMAP3503-based Gumstix Overo computer-on-module

  • Summit

    Provides DVI-D signals over an HDMI connector. Also features USB Host, USB OTG, Audio Stereo-out and line-in, and a 40-pin header with GPIO, PWM and A/D lines - an expansion board for any Overo COM.

  • USB Mini-B to Standard-A Cable

    A USB cable for connecting your USB Console Port-enabled Gumstix system to a development machine or for USB On-the-Go in device mode.

  • USB On-the-Go Cable (Mini-B to Mini-A)

    For USB Host or USB OTG in Host mode: connect your Gumstix Overo configuration to a downstream hub via this USB cable

Key components
FTDI FT232RQ USB UART Interface

Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface.

spec sheet
Micron 512MB DDR LPDRAM & 512MB NAND Flash Memory

Package-on-package (PoP) memory solution that minimizes power consumption, maximizes board space and increases speed.

microSD Card Slot

An onboard card-slot for system storage expansion using microSD cards.

Texas Instruments OMAP3503 Applications Processor

600MHz superscalar ARM Cortex-A8, featuring technology for enhanced code density, performance and NEON technology for multimedia.

spec sheet
Texas Instruments REG711 Converter

The REG711 is a switched capacitor voltage converter and produces a regulated, low ripple output voltage from an unregulated input voltage. Vin from 1.8V to 5.5V.

spec sheet
Texas Instruments TFP410 DVI Controller

A compact 64-pin TQFP, PanelBus package providing a reliable, low-current, low-noise, high-speed digital interface.

spec sheet
Texas Instruments TPS62111 Step-Down Converter

A low-noise synchronous step-down DC-DC converter. Component Max Vin: 17V, 1.5A.

spec sheet
Texas Instruments TPS65950 Power Management

The TPS65950 device is a highly integrated power-management integrated circuit (IC) that supports the power and peripheral requirements of the OMAP3-driven Overo series COMs.

spec sheet
Mating connectors
2 x 70-Pin AVX Connector (Male – Overo COMs)

Connect your Gumstix Overo COM to an expansion board with these 70-pin AVX connectors.

spec sheet
2 x 70-Pin AVX Connectors (Female – Overo Expansion)

Connect an Overo COM to an expansion board with these 70-pin AVX connectors.

spec sheet
Hirose 27-Pin Camera Connector (Overo COMs)

Connect a Caspa camera to an Overo COM with this connector (Hirose FH26-27S-0.3SHW)

spec sheet
Other connectors
2 x 3.5mm Stereo Audio Jacks

A low-profile, surface mount 3.5mm audio jack from CUI (CUI SJ-3523-SMT).

spec sheet
Molex HDMI SMT Connector

Connect to an HDMI/DVI-D enabled monitor or television with an HDMI or HDMI-to-DVI cable.

Power Jack

The CUI PJ1-022 power jack is the standard jack for all Gumstix 4.0 V and 5.0 V wall adapters.

spec sheet
USB Mini-AB Jack

This Mini-AB USB connector allows either a USB Mini-A or Mini-B male plug. For USB On-the-Go, this allows the system to operate in either host or device mode.

spec sheet
USB Mini-B to Standard-A Cable

A USB cable for connecting your USB Console Port-enabled Gumstix system to a development machine or for USB On-the-Go in device mode.

USB On-the-Go Cable (Mini-B to Mini-A)

For USB Host or USB OTG in Host mode: connect your Gumstix Overo configuration to a downstream hub via this USB cable

Links to manufacturer's specification sheets are provided for reference.
Comparable parts might be substituted in manufacturing.
Further hardware information (I/O pinouts, Benchmarks, schematics and more)

Supported Software:

  • Ubuntu
  • Yocto Project

The Overo® Summit Pack ships with a Ubuntu (Linaro) system card.

This image is recommended for beginners looking to get up and running as quickly as possible. Users who need the absolute latest supported version of Linux or more advanced developers may wish to consider switching to the Yocto Project image.

More information on supported software platforms for Gumstix products »

0 items
icon legend     show