Autonomous Kit For DuoVero
The Autonomous Kit for DuoVero allows engineers and makers to build a complete, DuoVero-powered UAV. It has dual-core processing, GPS and WiFi on a proven PX4-ready UAV controller board.
Autonomous Kit For DuoVero
The kit consists of the following components:
Powered by an AeroCore 2 for the DuoVero, which contains an ARM Cortex-M4 microprocessor, and an included DuoVero Zephyr-Y COM, the Autonomous Kit For DuoVero offers all the tools you need for your unmanned aerial vehicle.
With NutX RTOS for real-time servo control and onboard WiFi 802.11b/g/n and Bluetooth 4.1 communications, the Autonomous Kit for DuoVero will have you flying in no time at all.
The brain of the kit is the AeroCore 2 MAV control board which runs NuttX RTOS for real time servo control and sensor measurements. The DuoVero COM provides access to onboard wifi and Bluetooth 3.0 and/or 802.11b/g/n wireless communications transmitted by the U.FL antenna. It is fully compatible with PX4 software, including MAVLink and QGroundControl and supports Mission Planner, ArduPilot and APM Planner.
This kit replaces the discontinued AeroCore DV Kit and features the new AeroCore 2 for DuoVero and the Pre-GO board.
|USB Cable (micro-B to standard-A)||USB Cable (micro-B to standard-A)|
|DuoVero™ Zephyr COM||**OMAP4430-based Gumstix DuoVero computer-on-module** (includes OpenGL and DSP) runs at 1GHz with 1GB memory. Includes W2CBW0015 WiFi and Bluetooth module.|
|AeroCore 2 for DuoVero||AeroCore 2 for DuoVero|
2 x 70-pin Hirose DF40 Connectors
|Flash Memory (NAND)||
U-Blox NEO-7M GPS Receiver
PowerVR™ SGX540 OpenGL
|Digital Signal Processor||
ST L3G4200D 3-Axis Gyroscope
4.2 mm (0.16 inch)
50.1 mm W
96.5 mm L
Up to 2,500 Dhrystone MIPS
SmartReflex™ 2 Technology
ARM Cortex-M4 Microcontroller
|Processor Base Clock||
via microSD Card Slot
Built with components rated 0C < T <75C
|USB Console Port||
|U.FL Antenna with Collar||U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.|
|microSD Card Slot||An onboard card-slot for system storage expansion using microSD cards.|
|W2CBW0015 Wifi+Bluetooth Module||This elegant combination from Wi2Wi enables both 802.11b/g/n and Bluetooth 3.0.||Specs|
|Texas Instruments TWL6040 Audio Codec||The TWL6040 Audio Codec offers a high level of integration providing analog audio codec functions for portable applications.||Specs|
|Texas Instruments OMAP 4430 Processor||1GHz ARM Cortex-A9 MPCore OMAP 4430 processor offers symmetric multiprocessing (SMP) with hardware accelerated 2D and 3D graphics, 1080p HD video performance (2D), 720p stereoscopic 3D video performance (3D), and 20 MP main camera with 5MP stereo (dual cameras) imaging performance (per second).||Specs|
|Texas Instruments SN65HVD232 CAN Transceiver||Designed for use with Texas Instruments DSPs with CAN controllers and equivalent devices. Provides differential transmit and receive capability at speeds up to 1 Mbps.||Specs|
|Texas Instruments TPS62111 Step-Down Converter||A low-noise synchronous step-down DC-DC converter. **Component Max Vin:** 17V, 1.5A.||Specs|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|ST L3G4200D 3-Axis Gyroscope||Low-power three-axis angular rate sensor able to provide unprecedented stability of zero rate level and sensitivity over temperature and time.||Specs|
|Memory (SPI FRAM 1MB 1.8V)||Memory (SPI FRAM 1MB 1.8V)||Specs|
|MS5611 Barometric Sensor||A high resolution altitude and digital atmospheric pressure sensor accurate to within 10 cm.||Specs|
|DF13 R/A 5Pos 1.25mm SMT||5 position R/A connector for UART (DF13 series)||Specs|
|UBlox Neo-7M GPS Receiver Module||UBlox Neo-7M GPS Receiver Module||Specs|
|Micro B USB Plug||Micro B USB Plug|
|JST-XH Top 3Pos 2.5mm||CONN HEADER XH TOP 3POS 2.5MM|
|DF13 Top 5Pos 1.25mm||CONN HEADER 5POS 1.25MM STR TIN|
|Magnetic Buzzer SMT (5V 30mA 92dBA)||BUZZER MAGNETIC 5V 12.8MM SMD||Specs|
|ST L3GD20H 3-Axis Gyroscope||IC MEMS MOTION SENSOR 16LLGA. Updated version of ICL415 (L3G4200D)||Specs|
|LSM303D 6-Axis Accelerometer||System-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.||Specs|
|U.FL Connector||Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.|
|70-Pin DF40 Connectors (Male – DuoVero COMs)||Connect your Gumstix DuoVero COM to an expansion board with these 70-pin DF40 connectors.||Specs|
|70-Pin DF40 Connectors (Female – DuoVero Exp.)||Connect your Gumstix DuoVero expansion board to a COM with these 70-pin DF-40 connectors.||Specs|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.