Welcome to the Gumstix Store!

Gumstix PICO-IMX6 Dev Board

More Views

Gumstix PICO-IMX6 Dev Board

Availability: In stock

Unlock the Potential of the TechNexion PICO-IMX6

The PICO-IMX6 Dev Board has a lot to offer. From Gigabit to capacitive touch, HDMI to USB-OTG, this board delivers.

Order your TechNexion Compute Module from DigiKey

Designed by Gumstix in Geppetto D2O



Gumstix PICO-IMX6 Dev Board

Use this feature-rich expansion board with TechNexion PICO-IMX6 Compute Modules and take advantage of the NXP i.MX6 processor's power. Its wide array of multimedia and communication hardware is ideal for your next IoT project.

The Gumstix PICO-IMX6 Dev Board hosts HDMI, DSI and capacitive touch LCD display connectors for video output, Dual USB type-A and USB-OTG connectivity and Gigabit Ethernet. It also features a CSI2 camera connector, compatible with Raspberry Pi cameras, and more.

The TechNexion PICO-IMX6 series of SOMs are available from DigiKey

Customize Your Board

The PICO-IMX6 Dev Board was designed by Gumstix in Geppetto D2O. Try Geppetto out and customize the board to your needs. Add features and remove unwanted hardware, or start your own design from scratch with Geppetto's easy-to-use drag-and-drop interface.



Controller Area Network (CAN)

For use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard.


10/100/1000 Base-T


LCD Capable

LCD Manufacturer

Compatible with Newhaven Displays

LCD Size

4.3 inch

LCD Touchscreen

Capacitive Touch Ready

RTC Battery Holder

Holder for 6mm rechargeable coin cell RTC battery

Storage Expansion

via microSD Card Slot

USB Device

Micro B USB Plug


USB Micro-AB Connector

Key Components
microSD Card Slot An onboard card-slot for system storage expansion using microSD cards. Specs
FCI 15 pin FPC connector Raspberry pi CSI2 and DSI connector
Connector (Power Jack Medium) PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug
Connector (Battery 6mm) Rechargeable coin battery holder
IC (RTC 1.8V) IC (RTC 1.8V)
Texas Instruments SN65HVD232 CAN Transceiver Designed for use with Texas Instruments DSPs with CAN controllers and equivalent devices. Provides differential transmit and receive capability at speeds up to 1 Mbps. Specs
FTDI FT232RQ USB UART Interface Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface Specs
Crystal (32.768kHz TINY) CM415-32.768KDCF-UB
Mating Connectors
Hirose 40Pos FPC/FFC Connector CONN FPC/FFC 40POS .5MM HORZ SMD, Bottom Contacts
Related products