Gumstix Colibri iMX6 Dev Board

Backordered
PKG900000000340
$149.00

Gumstix Colibri iMX6 Dev Board is a development board ideal for engineers and makers who want to prototype and explore the possibilities with the Toradex Colibri iMX6 COM. This is a full-featured development platform with multimedia, USB and network I/O, and bootable MicroSD card slot.

Once you have tested the board, you may use Geppetto online to design and customize it for your own project.

Gumstix Colibri iMX6 Dev Board BluetoothLCDWiFi

Gumstix Colibri (iMX6) Development Board

This SBC-like expansion board breaks out many features of the Colibri i.MX6 so you can test and develop your project with ease.

The Colibri iMX6 targets a wide range of applications, including: Digital Signage, Medical Devices, Navigation, Industrial Automation, HMIs, Avionics, Entertainment system, POS, Data Acquisition, Thin Clients, Robotics, Gaming and much more.

Toradex Colibri i.MX6 COM is not included. You may purchase the COM directly from Toradex.

Customize Your Board

You can modify the design, layout and features of the Gumstix Colibri i.MX6 Dev Board to fit your project's requirements with ease in an intuitive drag-and-drop interface

Customize Your Kernel

To get started customizing the Yocto image for this board or any Geppetto-created expansion board based on the Toradex Colibri i.MX6 platform, Please review the Toradex webinar on building images for embedded linux.

Updated sources matching those created in the webinar are available here.

Related posts

Find more information about this product by reading one or all of the following:

Press Release

Included Components
Toradex Colibri Development Board

Toradex Colibri (iMX6) development board which includes HDMI, 4.3" resistive touch screen, ethernet, USB Host, USB OTG, audio in/out, bootable uSD card, real-time clock and GPIO inputs and outputs.

Access Point Mode

Yes

Bluetooth

4.1+BLE

LCD

LCD Capable

LCD Manufacturer

Compatible with Newhaven Displays

LCD Size

4.3 inch

RTC Battery Holder

Holder for 6mm rechargeable coin cell RTC battery

Storage Expansion

via microSD Card Slot

USB Device

Micro B USB Plug

WiFi

802.11b/g/n

Manufacturer

Texas Instruments

Key Components
U.FL Antenna with Collar

U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.

microSD Card Slot

An onboard card-slot for system storage expansion using microSD cards.

Specs
Connector (Power Jack Medium)

PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug

USB Standard A Jack

The USB Standard A jack allows a Gumstix system to operate in USB Host mode

Specs
Connector (Battery 6mm)

Rechargeable coin battery holder

IC (RTC 1.8V)

IC (RTC 1.8V)

FTDI FT232RQ USB UART Interface

Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface

Specs
TI WiLink8 WL1831

The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi and Bluetooth coexistence in a power-optimized design.

Specs
Crystal (32.768kHz TINY)

CM415-32.768KDCF-UB

Mating Connectors
U.FL Connector

Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.

Hirose 40Pos FPC/FFC Connector

CONN FPC/FFC 40POS .5MM HORZ SMD, Bottom Contacts

Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.

Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.

Our Support page links additional resources.

Software Links
uEnv-geppetto.txt This is a simple uEnv.txt to select a GDT-generated device tree i.e. fdtfile=geppetto.dtb ... replaced with uenvcmd=setenv fdtfile devicetree-${boardname}.dtb;
2017-10-16/colibri-imx6/morty/gumstix-xfce-image-colibri-imx6.sdcard.xz gumstix-xfce-image-colibri-imx6.sdcard.xz ddable file generated by buildbot on 2017-10-16 for colibri-imx6 from morty
2017-10-16/colibri-imx6/morty/gumstix-console-image-colibri-imx6.sdcard.xz gumstix-console-image-colibri-imx6.sdcard.xz ddable file generated by buildbot on 2017-10-16 for colibri-imx6 from morty
dt/ckIfYaew.dtb Generated device tree for BRD900000000340
Due to manufacturer supply chain end of year schedule, Gumstix' hardware manufacturing will be closed between December 14, 2018 to January 2, 2019.
For updates about your order, please contact us via chat below or email at sales@gumstix.com