Gumstix Pi Conduit LoRa Gateway Kit (915 MHz)

In stock

With the Gumstix Pi Conduit LoRa Gateway Kit (868 MHz), you can quickly deploy a LoRaWAN gateway for Raspberry Pi® Compute Module (not included).

Gumstix Pi Conduit LoRa Gateway is an LTE-ready LoRa® gateway solution with a NimbeLink® Skywire™ connector, Ethernet over USB, and a header for the RisingHF RHF0M301 gateway and concentrator module.

This version is reserved for North America Region.

Gumstix Pi Conduit LoRa Gateway Kit (915 MHz) Ethernet

Gumstix Pi Conduit Gateway Kit

With the Raspberry Pi® Compute Module or CM3 and the RHF0M301 gateway module, the Gumstix Pi Conduit can deliver long-range communications over LoRaWAN™ between the Internet and LoRa® devices. Add a NimbeLink® Skywire™ LTE modem and deploy this gateway anywhere.

Kit includes:

Raspberry Pi® Compute Module and Skywire LTE modem not included.

Important: 902 - 928 MHz frequency band is reserved for North America. If you are located in Europe, you should look at [Gumstix Pi Conduit LoRa Gateway Kit (868 MHz)] or Gumstix Pi Conduit LoRa Gateway Kit (434 MHz).

Customize Your Board

The Gumstix Pi Conduit LoRa Gateway design included in this kit is available in Geppetto for you to make it your own. Add sensors and GPS or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.

Related Posts

Learn more about this product by checking out the following:

Articles from Gumstix Blog

Included Components
USB Cable (micro-B to standard-A) USB Cable (micro-B to standard-A)
RHF0M301-915 LoRa Gateway Module RHF0M301-915 900MHz ~ 930MHz LoRa gateway module
Gumstix Pi Conduit LoRa Gateway Gumstix Pi Conduit LoRa Gateway
5V, 3.5A Power Adapter 5V power adapter at 3.5A for use in North America.

10/100 Ethernet via USB 2.0

USB Device

Micro B USB Plug

USB Host

2-port USB 2.0 hub

Key Components
Micro B USB Plug Micro B USB Plug
SODIMM Connector SODIMM connector to DDR2 200 pin module, such as the Raspberry Pi Compute Module
Connector (Power Jack Medium) PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug
LAN9512 Ethernet Controller and USB Hub IC USB 2.0 ETHER CTRLR 64QFN
FTDI FT232RQ USB UART Interface Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface Specs
Mating Connectors