Strata (LoRa 915 MHz)
The Strata LoRa board is a low-power wireless sensor node for LoRaWAN™ applications featuring Microchip ATmega32U4 microcontroller, barometer, ambient temperature sensor, and humidity sensor. This board is perfect for engineers and makers looking to test and prototype possibilities of LoRaWAN technology.
Once you have tested the board, you may use Geppetto online to design and customize it for your own project.
Strata (LoRa 915 MHz)
Strata - LoRa® Weather Station Node (915 MHz)
Put your IoT application where it needs to be with Low Power Wide Area Network (LPWAN) technology and LoRa®. The Microchip RN2903 provides an on-board LoRaWAN™ protocol stack for easy IoT integration. The Strata node can connect to any public LoRa® gateway on your IoT application's network to deliver data from anywhere.
The LoRa Transceiver module used in this board can be applied to automated meter reading, home and building automation, wireless alarm and security systems, industrial monitoring and control, and internet of things (IoT).
Important: 902 - 928 MHz frequency band is reserved for North America.
RN2903 reference manual available here.
Customize Your Board
Customize the Strata to your project's specific needs in Geppetto D2O. Add sensors or remove unused components with the ease of a drag-and-drop interface.
Learn more about this product by checking out the following:
Articles from Gumstix Blog
- Create a Strata Weather Station node and more with Microchip Atmega32U4
- LoRa Gateway and Node development boards now available!
|ATmega32U4 IoT Weather Station||IoT Weather Station powered by ATmega32U4 + LoRa transceiver and weather related sensors|
Barometric pressure sensor
|Flash Memory (NAND)||
|Processor Base Clock||
Ambient temperature sensor
Micro B USB Plug
|Micro B USB Plug||Micro B USB Plug|
|SMA Jack||CONN SMA JACK STR 50 OHM PCB|
|IC DGTL TEMP SENSOR LP SOT-563||Temp Monitoring System (Sensor)||Specs|
|Digital Temperature Sensor||SI7021 Temperature Sensor IC, Digital, 0.4 C, -40 C, 85 C, DFN, 6|
|LoRa Transceiver Module - US||Low-Power Long Range LoRa Technology Transceiver Module. This module is for operation in North America, Australia, and New Zealand ISM bands.|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|ATmega Series 32 KB Flash 2.5 KB SRAM 16 MHz 8-Bit Microcontroller - MLF/QFN-44||ATmega Series 32 KB Flash 2.5 KB SRAM 16 MHz 8-Bit Microcontroller - MLF/QFN-44|
|MS5611 Barometric Sensor||A high resolution altitude and digital atmospheric pressure sensor accurate to within 10 cm.||Specs|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.