Arbor 50C is an expansion board for any Overo COM with support for 5.0" Newhaven Capacitive multi-touch screen, Ethernet, USB and audio.
This board is ideal for providing a user interface for handheld devices needing multi-touch graphical input.
Test with an Arbor, then use Geppetto online to design and customize it for your own project.
Multi-touch ready with the Newhaven capacitive 5.0" touchscreen (screen sold separately), Arbor 50C features 10/100 Base-T Ethernet, USB Host, USB On-the-Go, audio stereo-out and line-in. Use it with any Overo-series COM (COM sold separately).
The connector for Newhaven Capacitive Multi-Touch Screens used on this board is ideal for providing a user interface for handheld devices needing multi-touch graphical input with audio for industrial, medical, and automation systems.
Requires either a 5V/3.5A power supply available from Gumstix or an external battery (not included). Must be between 5.5V - 36V and fit a 2 cell JST XH balance connector.
Customize Your Board
The Arbor 50C design is available in Geppetto for you to make it your own. Swap the 5.0" LCD connector for the 7.0", add WiFi or LTE connectivity or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.
Learn more about this product by checking out the following:
|Arbor50C||A larger LCD Capacitive Touch Screen with an ethernet connection.|
6-axis internal measurement unit (IMU)
Headphone and Microphone connectors
2 x 70-pin AVX connectors
Compatible with Newhaven Displays
Capacitive Touch Ready
|RTC Battery Holder||
Holder for 6mm rechargeable coin cell RTC battery
|USB Console Port||
Micro B USB Plug
|Microchip (SMSC) LAN9221 Ethernet Controller||A full-featured embedded LAN controller emphasizing performance, flexibility, ease of integration and system cost control while providing high performance and throughput.||Specs|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|Connector (Power Jack Medium)||PJ-018H-SMT, medium size (1.65mm), fits EIAJ-2 plug|
|Connector (Battery 6mm)||Rechargeable coin battery holder|
|Molex 6Pos FFC/FPC Connector||FFC & FPC Connectors RA SMT ZIF TOP 6P|
|Micro B USB Plug||Micro B USB Plug|
|JST-XH Top 3Pos 2.5mm||CONN HEADER XH TOP 3POS 2.5MM|
|Connector (Dual Stacking USB 2.0 )||Connector (Dual Stacking USB 2.0 )|
|ST L3GD20H 3-Axis Gyroscope||IC MEMS MOTION SENSOR 16LLGA. Updated version of ICL415 (L3G4200D)||Specs|
|LSM303D 6-Axis Accelerometer||System-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.||Specs|
|70-Pin AVX Connectors (Female – Overo Expansion)||Connect an Overo COM to an expansion board with these 70-pin AVX connectors.||Specs|
|Hirose 40Pos FPC/FFC Connector||CONN FPC/FFC 40POS .5MM HORZ SMD, Bottom Contacts|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
|uEnv-geppetto.txt||This is a simple uEnv.txt to select a GDT-generated device tree i.e. fdtfile=geppetto.dtb|
|dt/fPeWjEnW.dtb||Generated device tree for BRD900000000298|
|2015-10-17/overo/dev/MLO||MLO spl file generated by buildbot on 2015-10-17 for overo from dev|
|2015-10-17/overo/dev/u-boot.img||u-boot.img boot file generated by buildbot on 2015-10-17 for overo from dev|
|2015-10-17/overo/dev/gumstix-console-image-overo.tar.bz2||gumstix-console-image-overo.tar.bz2 tar file generated by buildbot on 2015-10-17 for overo from dev|
|2015-02-25/overo/master/MLO||U-Boot 2014.10 first-stage bootloader|
|2015-02-25/overo/master/u-boot.img||U-Boot 2014.10 second-stage bootloader|
|2015-02-25/overo/master/README||Build information about the assets for the Overo platform|
|2015-02-25/overo/master/gumstix-xfce-image-overo.tar.bz2||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment|
|2015-02-25/overo/master/gumstix-console-image-overo.ubi||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform without a desktop environment (UBI File System)|
|2015-02-25/overo/master/gumstix-xfce-image-overo.ubi||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment (UBI File System)|
|Overo Flashing MLO||[Flashing] This is an Overo MLO for a Yocto Console Image|
|Overo Flashing U-boot||[Flashing] This is an Overo MLO for a Yocto Console Image|