Arbor 43C is an expansion board for any Overo COM with 4.3” Newhaven Capacitive multi-touch screen, Ethernet, USB, and audio.
This board is ideal for providing a user interface for handheld devices needing multi-touch graphical input.
Test with an Arbor, then use Geppetto online to design and customize it for your own project.
Multi-touch ready with the Newhaven capacitive 4.3" touchscreen (screen sold separately), Arbor 43C features 10/100 Base-T Ethernet, USB Host, USB On-the-Go, audio stereo-out and line-in. Use it with any Overo-series COM (COM sold separately).
The connector for Newhaven Capacitive Multi-Touch Screens used on this board is ideal for providing a user interface for handheld devices needing multi-touch graphical input with audio for industrial, medical, and automation systems.
Customize Your Board
The Arbor 43C design is available in Geppetto for you to make it your own. Swap the 4.3" LCD connector for the 7.0", add WiFi or LTE connectivity or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.
Learn more about this product by checking out the following:
|Arbor43C||BRD for Arbor43C|
2 x 70-pin AVX connectors
10/100 Base-T Ethernet
Compatible with Newhaven Displays
Capacitive Touch Ready
|RTC Battery Holder||
Holder for 6mm rechargeable coin cell RTC battery
|USB Console Port||
|Microchip (SMSC) LAN9221 Ethernet Controller||A full-featured embedded LAN controller emphasizing performance, flexibility, ease of integration and system cost control while providing high performance and throughput.||Specs|
|Texas Instruments TPS62111 Step-Down Converter||A low-noise synchronous step-down DC-DC converter. **Component Max Vin:** 17V, 1.5A.||Specs|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|70-Pin AVX Connectors (Female – Overo Expansion)||Connect an Overo COM to an expansion board with these 70-pin AVX connectors.||Specs|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
|uEnv-geppetto.txt||This is a simple uEnv.txt to select a GDT-generated device tree i.e. fdtfile=geppetto.dtb|
|dt/ePBbcSLV.dtb||Generated device tree for BRD900000000132|
|2015-02-25/overo/master/MLO||U-Boot 2014.10 first-stage bootloader|
|2015-02-25/overo/master/u-boot.img||U-Boot 2014.10 second-stage bootloader|
|2015-02-25/overo/master/README||Build information about the assets for the Overo platform|
|2015-02-25/overo/master/gumstix-xfce-image-overo.tar.bz2||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment|
|2015-02-25/overo/master/gumstix-console-image-overo.ubi||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform without a desktop environment (UBI File System)|
|2015-02-25/overo/master/gumstix-xfce-image-overo.ubi||Yocto 1.7 filesystem running Linux kernel 3.17 for the Overo platform with the Xfce desktop environment (UBI File System)|