Pepper 43C is an Android-ready hand-held single board computer. It is a powerful, complete, and compact embedded solution supporting Yocto and Android with wireless connectivity and a Newhaven 4.3" capacitive multi-touch LCD touchscreen (sold separately).
Once you have tested the board, you may use Geppetto online to design and customize it for your own project.
Now supporting Android, the Pepper 43C is a powerful, single board computer (SBC) for developers interested in a Cortex A8 ARM processor. Featuring standard Gumstix hardware features such as 512 MB DDR3, 802.11 b/g/n with AP mode, Bluetooth 4.1 + BLE, a microSD card slot, audio connectivity, a console port and two USB On-The-Go ports. The Pepper 43R also supports:
- The Newhaven 4.3" capacitive multi-touch LCD touchscreen (sold separately).
- Expansion headers to accommodate applications such as I2C, SPI, and UARTs
- GPIO-controlled push buttons and LEDs
- Support for Yocto Project build system and Android Jellybean
The 4.3” flip-side connector for Newhaven Capacitive Multi-Touch Screen module used in this board is ideal for providing a user interface for all types of products. They are usually used in devices like personal DVD players and handheld devices but are well suited for industrial applications as well.
Important: This board requires external battery (not included). Must be between 5.5V - 36V and fit a 2 cell JST XH balance connector. Examples here.
Customize Your Board
The Pepper 43C is available in Geppetto for you to make it your own. Swap the 4.3" LCD connector for a 5.0" or 7.0" connector, add WiFi or LTE connectivity or strip it down to the bare essentials. Make it the board you need with Geppetto's easy to use drag-and-drop interface.
Learn more about this product by checking out the following:
Articles from Gumstix Blog
|Pepper 43C||This 4.3" PCAP design has 3 USB Jacks and a 802.11 b/g/n with Bluetooth 3.0|
|Access Point Mode||
4.1 + BLE
Compatible with displays from Newhaven Display International
Capacitive multi-touch screen
|RTC Battery Holder||
Holder for 6mm rechargeable coin cell RTC battery
Via microSD Card Slot
|USB Console Port||
|U.FL Antenna with Collar||U.FL antenna with collar for Bluetooth and/or 802.11b/g/n wireless communications.|
|JST-XH Top 3Pos 2.5mm||CONN HEADER XH TOP 3POS 2.5MM|
|microSD Card Slot||An onboard card-slot for system storage expansion using microSD cards.||Specs|
|8 Channel Bidirectional Level Shifter||IC XLATR VOLT-LVL 8B BDIR 20QFN|
|Texas Instruments TPS62111 Step-Down Converter||A low-noise synchronous step-down DC-DC converter. **Component Max Vin:** 17V, 1.5A.||Specs|
|PMIC for AM335x DDR3L||TPS65217DRSLR|
|FTDI FT232RQ USB UART Interface||Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface||Specs|
|TI WiLink8 WL1831||The certified WiLink 8 module from TI offers high throughput and extended range along with Wi-Fi and Bluetooth coexistence in a power-optimized design.||Specs|
|DDR3L 512MB 16bit||DDR3L 512MB 16bit||Specs|
|Sitara Processor 800MHz||AM3354 800MHz|
|U.FL Connector||Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.|
Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.
Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.
Our Support page links additional resources.
|2015-09-18/pepper/dev/MLO||U-Boot 2014.10 first-stage bootloader|
|2015-09-18/pepper/dev/u-boot.img||U-Boot 2014.10 second-stage bootloader|
|2015-09-18/pepper/dev/modules-pepper.tgz||Kernel modules for the Pepper platform|
|2015-09-18/pepper/dev/zImage||Linux kernel 3.18 image|
|2015-09-18/pepper/dev/README||Build information about the assets for the Pepper platform|
|2015-09-18/pepper/dev/gumstix-xfce-image-pepper.tar.bz2||Yocto 1.8 filesystem running Linux kernel 3.18 for the Pepper platform with the Xfce desktop environment|
|Pepper-43R-DTB-1.8||Device Tree for the Pepper-43R platform|
|Pepper-43C-DTB-1.8||Device Tree for the Pepper-43C platform|
|uEnv-geppetto.txt||This is a simple uEnv.txt to select a GDT-generated device tree i.e. fdtfile=geppetto.dtb|
|dt/IvkcLNWG.dtb||Generated device tree for BRD900000000074|