Aerocore 2 for NVIDIA® Jetson™

In stock
PKG900000000691
$275.00

Supercomputing in the Sky

Put the power of 256 CUDA cores in your MAV or robotics device with the NVIDIA® Jetson™ TX1 and TX2 compute modules and the Gumstix Aerocore 2 platform for accelerated computer vision and deep learning on the edge.

Aerocore 2 for NVIDIA® Jetson™ AccelerometerCamera ConnectorHDMI

Aerocore 2 for NVIDIA® Jetson™

The Aerocore 2 for NVIDIA Jetson puts the parallel processing power of NVIDIA's CUDA cores on a robotics-inspired development board.

The Gumstix Aerocore 2 platform is a tried and true blend of real-time autopilot firmware and high-level processing capabilities, employing an ARM Cortex M4 microcontroller, PX4 firmware, PWMs, serial buses, and GPS along with powerful Linux devices.

Featuring 4 camera connectors, a display port, and USB 3.0, the Aerocore 2 for Jetson is ready to take advantage of the Jetson TX1 and TX2's 256 CUDA cores for computer vision, object identification, AI and deep learning edge applications.

See the Aerocore 2 for NVIDIA Jetson in action in our demo videos below featuring object recognition using TensorFlow.

Sierra Wireless HL Socket information

The Sierra Wireless HL socket on this board requires a Sierra Wireless HL chip, an HL Snap-In Cover, and a Socket Removal Tool.

Included Components
AeroCore 2 for NVIDIA Jetson

MAV control board featuring an integrated Cortex-M4 microprocessor and NuttX RTOS. Compatible with: NVIDIA® Jetson™ compute module, the Pre-GO, and the Pre-GO PPP.

Accelerometer

6-axis internal measurement unit (IMU)

Barometer

Barometric pressure sensor

Camera Connector

MIPI CSI-2 Camera Connector

Controller Area Network (CAN)

For use in applications employing the CAN serial communication physical layer in accordance with the ISO 11898 standard.

Gyroscope

3-axis gyroscope

HDMI

micro HDMI

Processor

ARM Cortex-M4 Microcontroller

USB Device

Micro B USB Plug

USB OTG

USB Micro-AB Connector

5-pin GPS Connector

UART connection for Gumstix Pre-GO modules

Key Components
USB Micro AB Connector

Surface Mount USB Micro AB Connector

Specs
Micro HDMI (Type D)

Micro HDMI (Type D) SMT

Specs
Micro B USB Plug

Micro B USB Plug

JST-XH Top 3Pos 2.5mm

CONN HEADER XH TOP 3POS 2.5MM

DF13 Top 5Pos 1.25mm

CONN HEADER 5POS 1.25MM STR TIN

USB3.0 Standard A Jack THRU-HOLE Vertical

Conn USB 3.0 Type A RCP 9 POS Solder ST Thru-Hole 9 Terminal 1 Port Tray

Intel Joule CSI Camera (JCAM) Connector

Connector, Stacking, Rcpt, 40pos, 2row

DF30 Series 24 Position Dual Row 0.4 mm SMT Board to Board Receptacle

DF30 Series 24 Position Dual Row 0.4 mm SMT Board to Board Receptacle

Magnetic Buzzer SMT (5V 30mA 92dBA)

BUZZER MAGNETIC 5V 12.8MM SMD

Specs
Texas Instruments SN65HVD232 CAN Transceiver

Designed for use with Texas Instruments DSPs with CAN controllers and equivalent devices. Provides differential transmit and receive capability at speeds up to 1 Mbps.

Specs
FTDI FT232RQ USB UART Interface

Connect to an RS232 serial terminal over USB with the FTDI FT232RQ interface

Specs
ST L3GD20H 3-Axis Gyroscope

IC MEMS MOTION SENSOR 16LLGA. Updated version of ICL415 (L3G4200D)

Specs
Memory (SPI FRAM 1MB 1.8V)

Memory (SPI FRAM 1MB 1.8V)

Specs
Memory (256Kb I2C Serial Board EEPROM)

CAT24C256 Series 256 kbit (32 K x 8) 1.8-5.5V I2C CMOS Serial EEPROM - TSSOP-8

Specs
MS5611 Barometric Sensor

A high resolution altitude and digital atmospheric pressure sensor accurate to within 10 cm.

Specs
LSM303D 6-Axis Accelerometer

System-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.

Specs
Mating Connectors
U.FL Connector

Attach a U.FL Wi-Fi or Bluetooth antenna (not included) to a Gumstix system with this connector.

Please read the instructions in the README file carefully before starting. Instructions and functions are explained in the file.

Files that are needed (such as bootloader and operating system) to create a bootable disk image, are available below.

Our Support page links additional resources.

Software Version:

Due to manufacturer supply chain end of year schedule, Gumstix' hardware manufacturing will be closed between December 14, 2018 to January 2, 2019.
For updates about your order, please contact us via chat below or email at sales@gumstix.com